Genuine Power Support Screen Protection Film - Apple iPad Mini
(Compatible with iPad Mini 1, 2 and 3)
Anti Glare Film
PLEASE NOTE THIS ITEM IS IN JAPANESE PACKAGING - PLEASE SEE INSTALLATION INSTRUCTIONS BELOW
Protect your iPad mini screen from scratches, dirt and dust while reducing glare, fingerprints and smudges. New screen film is specially formulated to display higher detail while resisting glare and fingerprints and protecting your screen. Static cling adhesive film leaves no residue if film is removed.
Features
Installation Instructions – please also view videos below
Clean your screen with a lint-free cloth to remove any dirt. Make sure that there are no dust particles or oil deposits on your screen.
Step 1: Starting at one edge, slowly peel back the larger backing of the screen film.
Step 2: Align the edge of the film to your screen.
Step 3: Gently peel back the larger backing of the screen film and allow screen film to fall onto your screen.
Step 4: Use a lint-free cloth to secure the film to your screen and rub out the air bubbles to ensure proper adhesion. There may be temporary air bubbles in the silicone adhesive. Unless there is dust trapped under the film, these air bubbles will disappear in time. If dust is trapped under the film, attach a piece of cellophane tape to the corner of the film closest to the air bubble and lift up. Take a second piece of tape and dab the piece of dust. Once the piece of dust has been removed from the film or the screen, lay the film back down using a lint-free cloth to push out any air bubbles.
Step 5: If you wish to remove the film from your screen, apply a strip of cellophane tape to the corner of the film and use it to peel the film off of the surface of the screen.
Note: iPad Mini is not included and for illustrative purposes only.